A battery with 2,000 watt-hours (Wh) holds enough energy, on paper, to run a steady 100-watt load for 20 hours. The AC inverter uses some of that energy to power itself and convert battery power for your outlets. Your appliances receive less than the number on the box.
Start with an evening at home
List what you want to run, its wattage, and the hours you expect to use it. Multiply watts by hours for each device, then add the results. These example numbers illustrate the calculation. Replace them with readings from your equipment.
| Device | Draw | Time | Energy |
|---|---|---|---|
| Router | 12 W | 8 hours | 96 Wh |
| Two lights combined | 16 W | 5 hours | 80 Wh |
| Fan | 40 W | 8 hours | 320 Wh |
| Total | 68 W together | Mixed | 496 Wh |
Account for losses and a reserve
For an illustration, suppose a 2,000 Wh battery delivers 80% of its rated energy through its outlets under your chosen load. That gives you 1,600 Wh. Holding 400 Wh of that usable budget for the next morning leaves 1,200 Wh. At a steady 100 W, you would plan around 12 hours. The 80% figure is an assumption. Output mode, temperature, battery condition, load and time spent idling can change the result.
Check watts as well as watt-hours
Your total simultaneous demand must fit within the station's continuous output. A motor can draw more power briefly when it starts. Check the startup requirements separately. A battery can have energy left and still shut off a load that exceeds its output limit.
Try your intended combination while utility power is available. Write down the starting charge, ending charge, connected devices and elapsed time. For appliances that cycle, measure energy over a full day. See how to size a refrigerator load.
Calculation reference: Virginia Cooperative Extension appliance energy guide.