Home Power Picks Compare models

Field guide

Can a power station run your refrigerator?

Check startup demand and daily energy use, then use an appliance thermometer to monitor food during an outage.

A station needs enough output to start the refrigerator's compressor and enough stored energy to keep the refrigerator cycling. The refrigerator's running watts answer only part of the question.

Check the appliance and outlet

Record the refrigerator model, required voltage and plug type. Check the station's matching AC outlet, continuous rating and motor-start capability. Ask the appliance manufacturer for startup requirements when they are missing. A high peak-watt claim alone does not tell you how long the station can deliver that peak.

Measure a representative day

If your appliance and outlet suit a properly rated plug-in energy meter, record at least 24 hours of energy use. A refrigerator cycles on and off, and defrost cycles can raise the total. If your meter reads 1.2 kWh over 24 hours, that is 1,200 Wh, or an average of 50 W. An appliance's usage can change in a hot kitchen or with frequent door openings.

For a planning example, 1,600 Wh of usable AC energy divided by 50 W gives about 32 hours for that refrigerator alone. Add a continuous 25 W of other loads and the estimate drops to about 21 hours. Both numbers depend on the example assumptions. Check your setup while normal power is available.

Track food temperature separately

Place an appliance thermometer inside before a storm. With power off and doors kept shut, CDC gives about four hours for a refrigerator, 48 hours for a full freezer and 24 hours for a half-full freezer. Follow current food safety guidance if those limits are reached. Restoring power does not make spoiled food safe.

References: CDC food safety during a power outage and Virginia Cooperative Extension appliance energy guide. Use the runtime worksheet to add your other devices.